Imagine this: you’re cruising down the open road, the wind in your hair, and the sun on your face. You’re thirsty, but where do you put your drink? Fumbling around for your water bottle or coffee is a hassle. It can even be dangerous! That’s where a motorcycle cup holder comes in handy.
But finding the perfect cup holder can feel like a challenge. So many different kinds exist! Some attach to your handlebars, others to your frame, and they all look a little different. You want one that’s strong, easy to reach, and won’t spill your drink. It’s tough to know which one is best for your bike and your needs.
Don’t worry! This post is here to help. We’ll break down what makes a great motorcycle cup holder. You’ll learn about the different types, what to look for, and how to pick the one that fits your ride. Get ready to enjoy your drinks on the go, safely and easily!
Top Motorcycle Cup Holder Recommendations
No. 1
KEMIMOTO Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder with 0.6"-1.5" Alligator Clamp, Universal Water Bottle Cup Accessories for Bike, ATV/UTV, Scooter, Boat, Walker
- Upgraded Alligator Clamp-Patented Design: Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles
- Easy to Install on 0.6"-1.5" Pole: The alligator clamp of this kayak cup holder fits 0.6"-1.5" diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.
- 24oz Max Load Capacity: The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out. Not Compatible with Road King, Spyder RT, Burgman 400s.
- With Tightening Drawstring: The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride.
- Sturdy Fabric with 2 Separated Mesh Pockets: Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, sturdy and washable. Don’t worry about rusty and broken after 2-3 months. 2 Mesh pockets to easily hold your little things.
No. 2
FODSPORTS Motorcycle ATV Cup Holder, Upgraded Motorcycle Drink Holder with 0.5-1.57" Metal Clamp, Universal Water Bottle Holder for Bike Scooter Boat Stroller Golf Push Cart Wheelchair Tractor
- 【Compatible with Different Cup Sizes】FODSPORTS motorcycle drink holder is compatible with cups up to 3.6 inch in diameter, you can easily adjust it by the knob on the bottom of the cup holder to fit different cup sizes, the adjustment range is: 2.08''-3.6''. Suitable for such as water bottles, coffee mugs, beer bottles, sports cups, cups with handle, and more, and it is also Bluetooth compatible
- 【Heavy Duty Metal Clip & Quality Material】FODSPORTS motorcycle cup holder is made up of aluminum alloy and high quality TPE material, it's solid, durable and long-lasting. Heavy duty aluminum alloy metal clip design with built-in rubber anti-slip pads for a stronger grip while avoiding scratching the handlebars. The full wrap frame holds your cup tightly and won't bounce up and down and slide around or fall off while going over rough terrain
- 【32 oz Maximum Carrying Capacity】FODSPORTS motorcycle cup holder handlebar provide higher carrying capacity. After tested, the FODSPORTS motorcycle atv cup holder can reach a maximum carrying capacity of 32 oz. If your bottle weighs less than 32 ounces, please don't worry about breaking or dropping it. The FODSPORTS motorcycle water bottle holder can hold 12 oz-32 oz water glasses
- 【Wide Compatibility】FODSPORTS bike cup holder has wide compatibility, designed to be compatible with round tubing frames from 0.5" to 1.57" in diameter, and square tubing frames from 0.5" to 1.0". FODSPORTS bike water bottle holder can fit most all-terrain bikes, ATVs, motorcycles, bicycles, quads, boats, strollers, walkers, wheelchairs, scooters, golf carts, and more. And it also is a portable speaker stand
- 【Quick Installation & 360 Degree Rotation】This motorcycle cup holder is very easy to install, it takes less than 3 minutes to complete the installation. 360 degree rotation design even makes it compatible with different angles of handlebars, suitable for more scenarios. What's more, the package also comes with a free hex nut installation tool
SaleNo. 3
LEXIN C3 Motorcycle Cup Holder with 360° Swivel Ball Mount, Heavy-Duty Aluminum Drink Holder for 7/8"–1 1/4" Handlebars, Passenger Beverage Holder for Harley, ATV, UTV, Black
- Upgraded 360° Clamp – Built for Motorcycle Stability: Designed for motorcycles, the 360° locking clamp with 4 reinforced screws provides a strong, vibration-resistant grip. Anti-slip rubber pads prevent loosening or spinning—even at high speeds or on rough roads.
- Universal Motorcycle Fit (7/8"–1 1/4" Handlebars): Comes with multiple spacers to fit most motorcycle handlebars (7/8" to 1 1/4"). Also compatible with ATV and UTV as extended use for off-road riding.
- Anti-Spill Gear Design – Keeps Drinks Secure: The gear-shaped anti-slip top firmly grips bottles, cups, and cans, reducing movement and preventing spills during riding.
- Fits Most Bottles & Cups: With a diameter of 2.17"–2.76" and height of 4.92", it fits most water bottles, coffee cups, soda cans, and travel mugs. Not recommended for oversized bottles above 32 oz.
- Premium Aluminum Alloy Clamp – Stronger & Rust-Resistant：Built with a high-strength aluminum alloy clamp, offering better durability than plastic or standard metal holders. Lightweight, corrosion-resistant, and designed for long-term outdoor use.
SaleNo. 4
LEXIN LX-C3 Motorcycle Cup Holder with 360°swivel ball-Mount, Large Boat Drink Holder with Basket, Metal Handlebar Mount for Motorcycle Passenger/ATV/Scotter/Harley, Fits Handlebar 7/8'' to 1 1/4''
- Upgraded 360° Clamp Design: Experience enhanced stability with the upgraded LEXIN C3 motorcycle cup holder featuring a 360° clamp design. With 4 screws for increased strength, better load-bearing capacity, and a secure fit, you won't face issues of loosening or spinning. Two anti-skip pad gaskets are included to provide friction and ensure a snug fit on your handlebars, eliminating worries of falling or spinning during high-speed rides
- Versatile Fit 0.87"-1.25" Pole: The C3 motorcycle drink holder comes with two types of spacers, adaptable to handlebars/poles/bumpers with diameters ranging from 7/8" to 1 1/4". Compatible with various vehicles like motorcycles, Can-Am, ATVs, strollers, scooters, yachts, bicycles, boats, cruisers, canoes, golf carts, wheelchairs, and more
- Great Capacity: With an inner diameter of 2.17"-2.76" and a height of 4.92", this cup holder accommodates cups, cans, and bottles of different sizes. It comfortably fits standard even smaller water bottles, ensuring your drink is conveniently within reach without spillage
- Special “Gear” Basket: The LEXIN C3 cup holder features a special "gear" shape rubber sheet on top for a secure grip, preventing spills or falls while riding. An ideal gear for motorcycle riders, providing a sturdy and reliable cup-holding solution
- High-Caliber Durable Material: Crafted with an upgraded chrome aluminum mounting piece, the drink holder is more durable, lightweight, and washable compared to metal or plastic holders. Say goodbye to rust concerns. The bracket, made from strong, soft, and quick-drying material, cradles the cup gently without scratching, ensuring a dry and reliable hold after rainy days
SaleNo. 5
LEXIN C4 Extra Large Motorcycle Cup Holder for Harley Davidson, Max 32oz Drink Holder with 360° Ball Swivel, Aluminum Clamp for 7/8"-1 1/4" Handlebar/Bumper/Pole Mount, Apply for ATV, UTV, Boat, More
- Extra Large 32oz Capacity: The LEXIN C4 boasts an impressive 32oz capacity compared to the LX-C3 motorcycle cup holder, perfect for holding large drinks. With dimensions of 8.0" x 4.7" x 4.9", it accommodates various bottle shapes and sizes.
- Adjustable Fit to 3.15" in Diameter: Featuring an upgraded retractable fixator with a knob adjustment, the C4 drink holder adjusts effortlessly from 2.36" to 3.15" in diameter. The silicone protectors safeguard your cups from scratches and ensure a snug fit for bottles, mugs, cans, and more.
- Robust Construction: Made from high-quality aluminum alloy, the LEXIN C4 is built to withstand rugged conditions. The 360° ball swivel design allows for flexible installation on handlebars, bumpers, or any 7/8" to 1 1/4" pole, providing stability and durability.
- Weather-Resistant Material: The basket is made from high-quality neoprene, providing softness, quick-drying capabilities, and durability.It handles a variety of weather conditions, making it suitable for sunny days or rainy rides.
- Easy Installation: The LEXIN C4 includes all necessary components for a straightforward setup: 3 screws, 2 screwdrivers, 1 pair of thick spacers, and 1 pair of thin spacers. Follow the professional instructions to install it on your motorcycle or other vehicles with ease.
No. 6
Zreneyfex Motorcycle Cup Holder Replacement for Harley Davidson Handlebar Mount Rotate 360 Degrees for 7/8" to 1-1/4" Clamp
- Fits ANY Bike: Universal 7/8" to 1-1/4" clamp can be installed on Harleys, cruisers, ATVs & dirt bikes in seconds
- Never Spill Your Coffee Again: 360° rotating head keeps drinks upright even on sharp turns. Deep 3.8" base holds cups 3X more securely than shallow models
- Drink Positioning: Lock any angle, position for left-hand or right-hand access while riding
- Built Like a Tank: Aircraft-grade chrome steel laughs at rain, UV rays, and potholes. Vibration-proof Grip: Stays rock-solid at highway speeds (unlike flimsy plastic holders)
- Thirsty-Hydrate Like a Pro Rider: One-handed drink access, never fumble at stoplights. Fits 99% of tumblers (up to 3.6" wide) from espresso shots to Big Gulps
No. 7
KEMIMOTO Motorcycle Cup Holder, Oxford Fabric Motorcycle Drink Holder with 0.6"-1.5" Alligator Clamp, Universal Water Bottle Cup Accessories for Bike, ATV/UTV, Scooter, Boat, Walker, Black L
- Upgraded Alligator Clamp-Patented Design: Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles
- Easy to Install on 0.6"-1.5" Pole: The alligator clamp of this kayak cup holder fits 0.6"-1.5" diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.
- 24oz Max Load Capacity: The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out. Not Compatible with Road King, Spyder RT, Burgman 400s.
- With Tightening Drawstring: The adjustable top drawstring is reinforced and tight. You can cinch down on the top to hold the drink firm if the going gets bumpy keeping it from flopping around along your ride.
- Sturdy Fabric with 2 Separated Mesh Pockets: Be Made of 600D oxford fabric instead of other stainless steel or plastic holder, sturdy and washable. Don’t worry about rusty and broken after 2-3 months. 2 Mesh pockets to easily hold your little things.
No. 8
Kewig Anti-Theft Motorcycle Cup Holder, Extra Large Water Bottle Holder
- Larger & Adjustable Width: Kewig motorcycle cup holder can accommodate cups with a diameter range of 50-90mm, 1.96-3.5 inches, is easily to adjust the width of the kettle holder through knob on the bottom, Whatever water bottles, coffee mugs, beer bottles, sports cups and other cup also can be accommodate
- Sturdy & Safe & Quality Material: Our motorcycle drink holder come with sturdy and durable clamps, built-in rubber anti-slip pads for a stronger grip will not slip or vibrate, Made of PA66+GF high-strength composite material, the internal structure contains aluminum alloy parts, and adopts an anti-spill and anti-falling design, which is strong and safe
- 32oz Maximum Load Capacity: Kewig bike cup holder provide higher carrying capacity. After tested the max weight is 32oz, Our cup holder can accommodate 12oz-32oz water cups with reliable support and stability
- Easy Installation & 360 Rotation: This ATV cup holder is very easy to install, first, find a place you want install on just need to make the clamp install on cup holder main body on and then use clamp mount on, 360 degree rotation design even makes it compatible with different angles of handlebars, suitable for more scenarios
- Wide Compatibility: Kewig Bike water bottle holder with wide compatibility, large water bottles designed to fit diameter of 12-45mm/ 0.47-1.77 inches ATVs, motorcycles, bike, electric vehicles, scooters, strollers and golf carts, You can enjoy your favorite beverage while riding
Your Motorcycle Cup Holder: A Rider’s Best Friend
Riding a motorcycle is about freedom and adventure. Sometimes, you just want to bring your favorite drink along for the ride. A motorcycle cup holder makes this possible! It keeps your beverage secure and within easy reach. This guide helps you find the perfect one for your needs.
Key Features to Look For
When you shop for a motorcycle cup holder, several features make a big difference.
- Adjustability: The best holders can adjust to fit different cup and bottle sizes. Some have expandable bases or flexible arms. This is super important so your drink stays put.
- Mounting Options: How does it attach? Many attach to handlebars. Others can mount to mirrors or fairings. Think about where you want it and what works best for your bike.
- Security: You don’t want your drink flying off! Look for holders with a good grip. Some have straps or nets. These keep your drink from tipping or falling.
- Ease of Access: Can you grab your drink easily while riding? The holder should be in a spot that’s not awkward to reach. You want to take a sip without taking your eyes off the road for too long.
- Durability: It needs to withstand wind, rain, and vibrations. A strong holder lasts longer.
Important Materials
The stuff your cup holder is made of matters a lot.
- Metal: Aluminum and stainless steel are strong and don’t rust. They are great for tough conditions.
- Plastic: High-quality ABS plastic is tough and lightweight. It can handle bumps and drops. Cheaper plastic might break easily.
- Rubber/Silicone: These are often used for grips and liners. They help prevent slips and protect your cups.
Factors That Improve or Reduce Quality
Some things make a cup holder great, and others make it not so great.
- Good Design: A holder that fits well on your bike and holds your drink securely is high quality. Think about how it looks, too.
- Strong Construction: Well-made joints and secure mounting hardware mean it will last.
- Easy Installation: If it’s hard to put on, that’s a problem. Simple instructions and included tools are a plus.
- Poor Fit: A holder that wiggles or doesn’t hold different-sized cups well is low quality.
- Cheap Materials: Thin plastic or flimsy metal can break. This makes the holder unsafe.
- Difficult Access: If you have to stretch too far or struggle to get your drink, it’s not a good design.
User Experience and Use Cases
People use motorcycle cup holders for many reasons.
- Daily Commutes: Bring your morning coffee or water to work.
- Long Rides: Keep your hydration handy on extended trips.
- Cruising: Enjoy a cold drink on a leisurely ride.
- Convenience: No more stopping to take a drink. Keep your hands on the handlebars.
- Safety: A secure holder means less distraction from fumbling with a drink.
A good cup holder makes your riding experience much better. It adds a touch of comfort and convenience to your motorcycle adventures.
Frequently Asked Questions
Q: What is the main purpose of a motorcycle cup holder?
A: The main purpose is to hold your drink securely while you ride your motorcycle. This keeps it from spilling and allows you to access it easily.
Q: Are motorcycle cup holders universal?
A: Many are designed to fit most motorcycles, but some are specific to certain bike models or mounting locations. Always check the product description for compatibility.
Q: How do I install a motorcycle cup holder?
A: Installation usually involves attaching it to your handlebars, mirror stem, or fairing using screws or clamps. Most come with instructions.
Q: Will a cup holder affect my motorcycle’s handling?
A: A well-designed and properly installed cup holder should not significantly affect your motorcycle’s handling. Make sure it’s not too heavy or placed in a way that interferes with steering.
Q: What types of drinks can I put in a motorcycle cup holder?
A: You can usually put water bottles, travel mugs, cans, and some cups. The holder’s size and grip will determine what fits best.
Q: How do I clean my motorcycle cup holder?
A: Most can be cleaned with soap and water. For metal holders, you might use a metal polish. Check the manufacturer’s instructions.
Q: Are there cup holders that can be locked?
A: Some specialized holders might offer locking features for added security, but this is not common for standard cup holders.
Q: Can I use a cup holder in bad weather?
A: Yes, but make sure your drink is well-sealed. The holder itself should be made of weather-resistant materials.
Q: What if my cup holder doesn’t fit my drink?
A: Look for an adjustable cup holder. Many models expand or have flexible arms to accommodate different sizes.
Q: Where is the best place to mount a motorcycle cup holder?
A: This depends on your bike and preference. Handlebars are common for easy access. Some riders prefer mirror mounts or spots on the fairing.